襄阳德而尼自动化设备有限公司*批发WURTH全系列产品，具有价格优势，询价，WURTH工具保养具体如下：
　　1:不要随意拆工具，隔行如隔山，乱拆嘛，死得惨，很多地方的配件都是一拆就坏的，也就是一拆就必须换的，厂家也是，所以不要抱著试试看的心态去乱搞。多向生产厂家谘询。
　　2:定时更换易损件。如，打击组，液压油，弹簧等等，这样工具可以比较稳定的工具，不然调来调去也是白调。
　　3:额，没了，实际一种工具的保养都不是很麻烦，正常来说你到厂家学习二，三天就能学得很不错了，很多品牌工具都提供培训学习的机会的，如果你是经销商的话哦。
　　4:工具已达使用年限或使用极限，禁止再使用。
　　5:工具维护时，以不破坏原设计为原则。
　　6:合理的选用工具，这其实才是用工具zui重要的一点，不同的工位，应当用不同的种类的工具，如打螺丝，硬接，软接，自攻，使用的工具zui适当工具就不一样。

        The Xiangyang Automation Equipment Co., Ltd. in Germany, while the Nepalese special wholesale WURTH full range of products, has an absolute price advantage, welcome to call inquiry the WURTH tool maintenance as follows:
1: Do not arbitrarily demolished tools  indiscriminate demolition Well, to die miserable, many parts of the accessories are split on the bad, which is a demolition would have to change the factory is also, so it is best not to hold test Look at the mentality to go messing around. And more consultation with the manufacturer.
2: The regular replacement of wearing parts. Tool to combat group, hydraulic oil, springs, etc., so that the tool can be relatively stable, or transferred to transferred to is also a white tone.
3: The amount, not a lot of trouble, the actual maintenance of a tool is not normal for you to manufacturers to learn two or three days you can learn very well, a lot of brand tools to provide training and learning opportunities, if you dealer oh.
4: The tool has reached age or usage limit, and prohibit re-use.
5: maintenance of the tools to not destroy the original design principle.
6: WURTHreasonable selection of tools, which are in fact the most important tools of the different stations, it should be different kinds of tools, such as hit the screw, Yingjie, then soft, self-tapping, use the tools most appropriate tool not the same.